TriCure
TriCure Turf Wetting Agent - AD Wetting Agent Pellets
55.86 GBP
TriCure AD™ Pellets <p>Many alternative pellets take a long time to dissolve – resulting in low rates of wetter being actually applied. </p> <p>As TriCure AD Pellets contain a high proportion of active ingredient and dissolve rapidly, Turf Managers can be confident of optimum treatment results. </p> <p>TriCure AD and TriCure AD Pellets are non-phytotoxic and will not burn or discolour turf. </p> Application Rates of TriCure AD™ Pellets Use Application Times per 100 m² Time taken for 1 pellet to dissolve fully (10 litres/ha) Apply For To give Low Rate application* <br>(3 litres/ha) Apply For 6 minutes 3 minutes 20 seconds 1 minutes 40 seconds 8 minutes 4 minutes 27 seconds 2 minutes 13 seconds 10 minutes 5 minutes 33 seconds 2 minutes 47 seconds <p>*Supplement with further irrigation to ensure optimum penetration throughout the rootzone. </p> Application Information of TriCure AD™ Pellets <p>The rate at which TriCure AD Pellets dissolve is determined by (1) Water Pressure (2) Flow Rate and (3) Water Temperature. To ensure correct dosage, carry out a calibration by recording the time taken for one pellet to fully dissolve. </p> <p>Then use the table below to determine the correct dosage per 100 sq m. </p> <p>E.G. – Pellet takes 10 minutes to dissolve. </p> <p>Thus 5 minutes 33 seconds of application per 100 sq.m gives full rate application (approx. 10 L/ha). </p> <p>2 minutes 47 seconds of application per 100 sq.m gives low rate application (approx. 5 L/ha). </p> <p>Full rate (10 L/ha) will provide activity for up to 4 weeks. </p> <p>Low rate (5 L/ha) will provide activity for around 2 weeks. </p> <p> Please note: Longevity of activity is dependent on soil type and climatic conditions. </p> <p>TriCure AD Pellets can be applied through the PelletPro Tablet Applicator. </p>
Buy on Pitchcare ↗