Everedge
Everedge - Classic CorTen - 5m Pack, 150mm / CorTen
70.02 GBP
<p> <span>EverEdge is the permanent solution to the age-old problem of maintaining neat edges for lawns, path edging, flower and vegetable beds, and can be used in a variety of soil conditions. </span> </p> <p> <span>The </span>CorTen option is a highly attractive and practical solution, as this unique product features a special steel-finish coating which weathers naturally and creates a rusty effect over time (approximately 1-2 months depending on rainfall). </p> Advisories <ul> <li>Please note: The strength of the steel is not affected due to the rust sitting on top the metal, therefore protecting it against the elements. </li> <li>CorTen steel and Galvanised steel can have sharp edges and <strong>extra care must be taken when installing these products in properties with children or pets. </strong> If you would like advice on whether these finishes are suitable for your garden please call us on 01902 440250. </li> </ul> <p>Our Lawn Edging Iron is available to assist with the installation of EverEdge. </p> EverEdge CorTen Installation Examples <div> <br> </div> Dimensions <ul> <li>Length - 1 metre lengths that come in a pack 5 x 1m strips </li> <li>Heights - 100mm (4") and 125mm (5") excludes spikes </li> <li>Thickness - 1.6mm </li> <li>Spike length - 94mm </li> </ul> <p> <br> </p> Easy to Install, No Maintenance <p>EverEdge is very easy to install. Once a neat edge has been created, the only tools you will need are a heavy hammer or mallet, a screwdriver and a block of wood. EverEdge is engineered from 1.6mm gauge galvanised mild steel, coated with corrosion-resistant black paint finish. So once it's installed, it's maintenance-free. </p> <p>To anchor EverEdge securely in poor ground conditions, use the Pin & Sleeve System. </p> <p> <br> </p> <br> Installation <ol> <li>It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved. </li> <li>Place EverEdge where required. Take a block of wood and place on top of the EverEdge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend EverEdge as required. </li> <li>Link EverEdge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver. </li> </ol> <p> <br> </p> FAQs
Buy on Pitchcare ↗