Everedge
Everedge - Classic - 5m Pack, Slate / 75mm
45.60 GBP
Advisories <ul> <li>As EverEdge overlaps and interlocks, please remember to add 6% to your actual requirement - that is 6 cm per metre of EverEdge you use. <br> </li> <li>CorTen steel and Galvanised steel can have sharp edges and <strong>extra care must be taken when installing these products in properties with children or pets </strong>. If you would like advice on whether these finishes are suitable for your garden please call us on 01902 440250. </li> </ul> <p>Our Lawn Edging Iron is available to assist with the installation of EverEdge. </p> EverEdge Installation Examples Gallery <div> <br> </div> <p> <strong>EverEdge is easy to install and requires no further maintenance. </strong> </p> <p>Once a neat earth edge has been established, the only tools required to install EverEdge are a heavy hammer, a screwdriver, and a block of wood. EverEdge is engineered from 1.6mm gauge galvanised mild steel, coated with corrosion-resistant paint finish. This means that once it's installed, it's maintenance-free. The depth stated does <span>not </span> incorporate the spikes. </p> <p>Please note that for most applications, lawn to path or lawn to flowerbed, the 1.6 mm is the preferred product to use, however if there is a possibility of vehicle traffic then the Heavy Duty or ProEdge (2.5 mm) is preferable, please contact a member of our technical sales team for more information. </p> Dimensions: <ul> <li>Length - 1 metre lengths that come in a pack 5 x 1m strips </li> <li>Heights - 75mm (3"), 100mm (4") and 125mm (5") </li> <li>Thickness - 1.6mm (Classic) </li> <li>Spike length - 94mm </li> </ul> EverEdge Installation Instructions & Video <ul> <li>It is important to form either a new edge or to re-cut your existing edge. This can be straight or curved. </li> <li>Place EverEdge where required. Take a block of wood and place on top of the EverEdge and hammer in to the ground to approximately 15mm below your cut grass level. Curve or bend EverEdge as required. </li> <li>Link the EverEdge by locking on to the previous piece. There is also a tongue below the locking piece which should be pushed through the hole with a screwdriver. </li> </ul> <p>EverEdge Basic Installation Guidelines </p> <p>To anchor EverEdge securely in poor ground conditions, use the EverEdge Pin & Sleeve System. </p> FAQs
Buy on Pitchcare ↗